特氟龙
  设为首页  |   加入收藏  |   RSS RSS2  |   网站地图
  
塑胶原料| 公司简介| 产品分类| 供货目录| 供应信息| 原料物性| SGS报告| 联系我们  
ABS塑胶原料
PP塑胶原料
PE塑胶原料
PVC塑胶原料
HIPS塑胶原料
AS塑胶原料
COC塑胶原料
PC塑胶原料
PC+ABS塑胶原料
PMMA塑胶原料
POM塑胶原料
PA6塑胶原料
PA66塑胶原料
PBT塑胶原料
PPO塑胶原料
PPS塑胶原料
POP塑胶原料
PPA塑胶原料
PA12塑胶原料
PA6T塑胶原料
PA9T塑胶原料
PA46塑胶原料
LCP塑胶原料
PES塑胶原料
PEI塑胶原料
PEEK塑胶原料
PAR塑料原料
K(Q)胶塑料原料
TPE塑料原料
TPU塑料原料
TPR塑料原料
TPV塑料原料
TPX塑料原料
EVA塑料原料
POE塑料原料
TPEE塑料原料
铁氟龙PVDF
铁氟龙PTFE
铁氟龙FEP
铁氟龙PFA
铁氟龙ETFE
铁氟龙PCTFE
TR90水口料
TR90副牌料
TR90改性料
TR90眼镜架料
TR90原料
更多的>>

联系人:肖先生
手机:13549213581
电话:0769-87795123
传真:0769-87795123
Q Q:15397858

PFA 350, 流动性低, 抗溶解性, 延展性 Teflon® PFA 350 全氟烷氧基 DuPont Fluoropolymers 产品说明 DuPont™ Teflon® PFA 350 is a general-purpose resin available in clear, 2.5-mm (0.1-in.) pellets. Compared with other grades of Teflon® PFA, its most unique features are a relatively low flow rate, greatly increased flex life, and enhanced resistance to environmental stress cracking. Teflon® PFA 350 and the other Teflon® PFA (perfluoroalkoxy) fluoropolymer resins combine theprocessing ease of conventional thermoplastics with properties similar to those of polytetrafluoroethylene (PTFE). They have high melt strength, stability at high processing temperatures, and resistance to creep at high service temperature. Teflon® PFA 350 is preferred when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. For a given process, its high melt strength and thermal stability can be used to improve rates. Compared with other fluoropolymers, its creep resistance at its high service temperatures provides a superior balance and level of end-use properties. Properly processed products made from neat Teflon® PFA 350 resin provide the superior properties typical of the fluoropolymer resins: retention of properties after service at 260°C (500°F), useful properties at -196°C (-320°F), and chemical inertness to nearly all industrial chemicals and solvents. Dielectric constant and dissipation factor are exceptionally low. Molded products have moderate stiffness and high ultimate elongation. In a flame situation, products of Teflon® PFA 350 resist ignition and do not themselves promote flame spread. When ignited by flame from other sources, their contribution of heat is small and with very little smoke. Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions. 总体 材料状态 • 已商用:当前有效 供货地区 • 北美洲 • 欧洲 • 南美洲 • 亚太地区 • 刚性,良好 • 流动性低 • 烟释放,低 性能特点 • 抗溶解性 • 耐化学性良好 • 良好的抗蠕变性 • 耐气候影响性能良好 • 延展性,高 • 良好的熔体强度 • 热稳定性,良好 用途 • 衬里 • 管道 • 零件装置 • 阀门/阀门部件 • 管道 外观 • 清晰/透明 形式 • 颗粒料 加工方法 • 吹塑成型 • 树脂传递成型 • 注射成型 • 挤出 • 压缩模塑 物理性能 额定值单位制 测试方法 比重 2.14g/cm³ ASTM D792 熔流率 (372°C/5.0 kg) 2.0g/10 min ASTM D1238 吸水率 (24 hr) 0.030% ASTM D570 机械性能 额定值单位制 测试方法 抗张强度 ASTM D638 屈服, 23°C 15.2MPa 23°C 28.0MPa 250°C 14.0MPa 伸长率 ASTM D638 断裂, 23°C 300% 断裂, 250°C 500% 弯曲模量 ASTM D790 23°C 625MPa 250°C 69.0MPa 硬度 额定值单位制 测试方法 硬度计硬度 (邵氏 D) 55 ASTM D2240 热性能 额定值单位制 测试方法 熔融温度 302 到 310°C 线形膨胀系数 - 流动 ASTM D696 21 到 100°C 0.00014cm/cm/°C 100 到 149°C 0.00018cm/cm/°C 149 到 209°C 0.00022cm/cm/°C 1 / 2 Teflon® PFA 350 2012年9月30日 全氟烷氧基 DuPont Fluoropolymers 电气性能 额定值单位制 测试方法 体积电阻率 1.0E+18ohm•cm ASTM D257 介电强度 2 (0.254 mm) 79kV/mm ASTM D149 介电常数 ASTM D150 60 Hz 2.03 1 MHz 2.03 耗散因数 ASTM D150 60 Hz 0.00010 1 MHz 0.00010 可燃性 额定值单位制 测试方法 极限氧指数 95% ASTM D2863
 
特氟龙,氟塑料,特氟龙塑料价格,氟塑料用途,PFA,PVDF,PTFE,FEP,ETFE,铁氟龙喷涂,特氟龙喷涂,聚四氟乙烯,聚偏氟乙烯
版权所有:东莞市双帮塑胶原料有限公司    网址:http://www.teflonf.com/
  • 粤ICP备12050428号-11