PTFE 9B,电器导线绝缘材料PTFE, 抗溶解性PTFE, 食品接触的合规性PTFE, 阀门/阀门部件PTFE, 密封PTFE
Teflon® PTFE 9B
聚四氟乙烯
DuPont Fluoropolymers

产品说明

Teflon PTFE 9B is a free-flowing white powder composed of premelted resin. It is designed for use in the ram extrusion process. Compared with other DuPont resins suitable for ram extrusion, Teflon® PTFE 9B provides outstanding resistance to charge fracture (poker-chipping) caused by excessive back-pressure during the extrusion of small-diameter rods, thin-wall tubing, and complicated profiles. Its uniform particle characteristics make it well suited for difficult feeding conditions.

Properly processed products made from neat Teflon® PTFE 9B provide the superior properties typical of the fluoropolymer resins: retention of properties after service at 260°C (500°F), useful properties at -240°C (-400°F), chemical inertness to nearly all industrial chemicals and solvents, and low friction and antistick surfaces. Dielectric properties are outstanding and stable with frequency and temperature.

In a flame situation, products of Teflon® PTFE 9B resist ignition and do not themselves promote flame spread. When ignited by flame from other sources, their contribution of heat is small and with very little smoke.

Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.

总体

材料状态 • 已商用：当前有效   
供货地区 • 北美洲   
 • 低摩擦系数 • 耐化学性良好 • 烟释放，低 
性能特点 • 抗溶解性 • 耐气候影响性能良好  
   • 延展性，高 
 • 可切削 • 食品接触的合规性  
    
用途 • 电器导线绝缘材料 • 密封 • 条材 
 • 管道 • 套管 • 轴承 
    
机构评级 • FDA 21 CFR 177.1550   
外观 • 白色   
形式 • 粉状   
加工方法 • 挤出 • 烧结  

物理性能 额定值单位制 测试方法
表观密度 0.58g/cm³ ASTM D1895
热性能 额定值单位制 
熔融温度 327°C 
补充信息  
Average Particle Size, ASTM D4894: 550 µm  
Flow, ASTM D4894: 50 g/10 min  

备注
1 一般属性：这些不能被视为规格。

1 / 1